 |
“Q485” DIAL INDICATOR KIT
Q485 2” DIAL INDICATOR KIT for fine adjustment of “Q” pump flow rate settings. A convenient dial indicator with direct reading count hands for precise flow rate setting. Responds to slightest turn of the “Q” pump adjustment knob. One revolution of primary pointer equals 10% of maximum flow rate (each increment on dial represents 1/1000 of maximum flow rate.) Secondary dial indicates each 10%. Easily attaches to all “Q” pump bases. Can be ordered with pump or separately.
|
Back to Top
|
TUBING ADAPTERS FOR PLASTIC CASE
PUMP HEADS
The integrally molded port fittings on the standard FMI Type K pump heads accept all 1/4” O.D. tubing. For other tubing arrangements, special port adapters are required.
|
#R412-0K Adaptor for 1/8” I.D. Tubes.
#R412-1K Adaptor for 1/4” I.D. Tubes.
#R412-2K Adaptor for 3/8” I.D. Tubes.
#R412-5K Adaptor for 1/4-28 ferrule fittings
#H476-K Adaptor for 1/8” O.D. Tubes
|
|
 |
”Q661” SMALL BORE TUBING KIT
Designed for all LF Pump Heads and to complement the FMI R479, R412-5K, and PD-60-LF, the Small Bore Tubing Kit has a flangeless design that eliminates the need for special tools and assures leak-free, zero dead volume connections. They provide Tefzel and Teflon wetted surfaces.
|
|
Kit Q661 - 1/16” & 1/8”
Contains Both
Q661A and Q661B
|
Kit Q661A - 1/16”
10’ - 1/16”O.D. x 1/32” I.D. TFE Tubing
10 - Delrin Nuts (Black)
10 - Tefzel Ferrules (Blue) |
Kit Q661B - 1/8”
10’ - 1/8”O.D. x 1/16” I.D. TFE Tubing
10 - Delrin Nuts (Green)
10 - Tefzel Ferrules (Yellow)
|
Kit Q661C - 1/8”
10’ - 1/8”O.D. x 1/16” I.D. TFE Tubing
10 - Teflon Nuts (White)
10 - Tefzel Ferrules (Yellow)
|
|
Back to Top
|
“RH/Q”
This is a complete adaptation system that permits use of an RH miniature pump head on any Q drive module. Once the RH pump head is fitted (3 screws) to the kit parts, it can be slipped into place on the drive module in seconds without tools. To remove it, simply loosen the two thumb nuts of the motor base and slip it off.
|
R479 KIT FOR LOW FLOW APPLICATIONS (REPLACES R412, WHEN USED)
|
|
"R479" LOW FLOW ISOLATION KIT
Kit #R479 is a Teflon adapter for FMI Stainless Steel (S) pump heads that are used in low flow (below 50 ml/min) applications where minimum system dead volume and maximum chemical inertness is required.
The kit provides 1/4-28 internal machine threads that are used with low flow tube fittings for small bore tubing of 1/8” O.D. or less, such as Kits Q661 (see pg 21). Particularly useful in chromatography applications and when using Pulse Dampener PD-60-LF (shown below).
|
|
Kit #R479 Consisting of four ferrules, two adapters & assembly/removal tools
|
|
| #R478A Consists of ten spare ferrules |
|
|
Back to Top
|
56C FACE MOTOR
Use the FMI P56C Adapter Kit for easy hook-up to your NEMA 56C FACE Foot Mount motor. Specify P56C
Shipping Weight: 4 lb (1.80 kg)
|
|
|
LOW FLOW BARB ADAPTERS FOR 1/16” TUBING
Threaded 1/4-28 UNF Fitting to Kynar Barb Bottom sealing, rotating adapters consisting of a white nylon 1/4-28 fitting with 5/16" hex nut and Kynar (fluid path) insert barb.
|
|
Back to Top
|
LOW FLOW BARB ADAPTERS FOR 1/8” I.D. TUBING
Threaded 1/4-28 UNF Fitting to Kynar Barb Bottom sealing, rotating adapters consisting of a white nylon 1/4-28 fitting with 5/16" hex nut and Kynar (fluid path) insert barb.
|
Back to Top
|
FMI PULSE DAMPENER “PD-60-LF”
The FMI Pulse Dampener PD-60-LF is designed to effectively suppress approximately 90% of the pulse magnitude generated by piston type metering pumps operating at flow rates up to 50 ml/min and stroke rates up to 150 per minute against head pressures of 10 to 65 psig. It features low internal volume, isolated pressure gauge, corrosion resistant wetted parts of type 316 stainless steel and TFE, flow-through (self-purging) design, excellent reduction of base line drift and noise in feeding low-pressure liquid chromatography systems, all in a small (2.7” x 5” x 6” high), lightweight (1.6 lbs net) package arranged to accept standard 1/4-28 tubing accessories.
|
|
“PD-HF” IN-LINE PULSE SUPPRESSOR
NEW IN-LINE PULSE SUPPRESSOR for high flow systems of 50 ml/min or greater and stroke rates higher than 150 spm against head pressures of 10 to 65 psig. Unique encapsulated polyethylene bellows design that eliminates tubing vibrations and cavitation problems. Easy to connect 1/4” compression fittings. Best results achieved when installed on both suction and discharge lines.
|
Back to Top
|
CORRUGATED TEFLON TUBING PULSE SUPPRESSOR
Highly flexible no kink tubing for high flow, 50 ml/min or greater, high pressure (100 psig) applications. Eliminates cavitation and mechanical stress. Best results when used on both suction and discharge lines. Slips over 3/8” barbed fitting.
3/8”1.D.x12” long
|
