Ceramic Pump

Advantages Over Syringe Dispensing Applications

  • No valves to leak, clog, hang-up or service
  • Simple 2 port configuration
  • One moving part - only the ceramic piston
  • low Power Consumption - One pump, one driver board
  • Fast through-put - same FMI dispenser is used for fast dilution, washing and continuous pumping

Advantages Over Peristaltic Metering Applications

  • No tubes to squeeze, change or service
  • Output does not change more than ± 1% of set value
  • Rotating ceramic internals are unaffected by motor speed
  • Sapphire hard ceramic internals are unaffected by slurries and particles
  • No service required for millions of cycles